Showing all 10 results

Amron Oxygen Treatment Hood

120.00$

Features:

  • Latex Neck Seals (Trimmed P/N: 8891-005-00 and Untrimmed P/N: 8891-005) are compatible with BOTH OLD Neck Ring (P/N: 8891-001) and 2014 improved Neck Ring (P/N: 8891-011)
  • Both versions of the Oxygen Treatment Hood P/N: 8891-010 fit BOTH OLD and 2014 improved Neck Rings
  • CE and FDA Registered
  • Optimum cooling and noise reduction
  • Reusable neck ring (autoclavable)
  • Conveniently located hoses reduce bulk and improve comfort
  • Designed for simplicity, performance, economy, ease-of-use and safe effective cleaning
  • Innovative design allows patient to recline comfortably
  • Multipurpose port for gas analysis or entertainment option
  • Positive O-ring seal between hood and neck ring
  • Soft vinyl hood with extra-large optical quality window
  • Replaceable surgical latex neck seal with sized trim lines
  • Optional entertainment system with pneumatic headset
  • Replaces P/N: 8892

Note: Neck Seal comes installed on neck ring

Sterilization:

Please reference the Cleaning Manual located in the Attachments Tab on this web page for recommended cleaning instructions. Oxygen Treatment Hood can be sterilized using either gas sterilization method, however multiple cycles of gas sterilizing over time will shorten the products working life.

Component Breakdown:

  • P/N 8891-010: Vinyl Hood with Optical Window
  • P/N 8891-005-00: Untrimmed Latex Neck Seal
  • P/N 8891-011: Neck Ring
  • P/N 8891-15: O-ring
  • P/N 8891-25: Multipurpose Plug

Note: The neck seal contains natural rubber latex which can cause allergic reactions. Please select our Model 8891-03 Medical Grade Silicone Hood Assembly if you believe the patient may have a latex sensitivity or allergy.

Caution: Federal law (USA) mandates that Amron can only sell this product to physicians and/or licensed clinical practitioners.

Specifications:

  • Neck Ring: Polycarbonate (Autoclavable)
  • Hood Ring: PVC
  • Hood: Clear soft vinyl (PVC)
  • Hood Window: Optical press polished vinyl
  • Neck Seal: Latex
  • O-ring, Neck Ring: Nitrile
  • Multipurpose Ring: Nitrile
  • Supply and Exhaust Ports: Male 22 mm
  • Multipurpose Port: 0.5 in. (1.27 cm) diameter
  • Diameter: 12.5 in. (31.75 cm)
  • Height: 13.5 in. (34.29 cm)
  • Weight: 1.37 lbs. (21.9 oz.)

 

In Stock

AVOX Bibs Mask System

1,350.00$

Features:

  • Full head harness for added comfort during long administration
  • Exhausts exhaled gases over board, permitting minimum ventilation of the chamber
  • Demand Regulator permits constant flow operation
  • Demand Regulator designed to operate with constant inlet pressure of 65 to 125 PSI over chamber pressure

Specifications:

  • Weight: 3.9 lbs.

In Stock

Bibs Mask 350 M

1,580.00$

Features:

  • Third party Tested and Certified by NUI to Norsok U-101:1999 and Verified by DNV
  • Easy Breathing (light inhalation and exhalation resistance, resulting in a low work of breathing)
  • Rugged Regulator Housing with Stainless Steel Valve Assemblies
  • Tool-less Removal of Demand and Exhaust Valve Assemblies for ease of maintenance and service
  • Pneumatically Balanced Demand Regulator with fine tune adjustment
  • Pneumatically Balanced Exhaust Regulator with overboard dump, permits minimum ventilation of the chamber
  • Vacuum Relief Valve Included
  • Gas Router and CO2 Purge Mechanism Attached to the Valves
  • Double Diaphragm Design with Removable Diaphragms and locking Diaphragm Covers for proper alignment and compression
  • Ultrafit, Hi-Comfort Silicone Oral Nasal, designed to fit most faces and designed to accommodate a microphone option
  • Full Head Harness for added comfort during long administration
  • Pressure and Collapse tested 10 ft. Hose Assembly with Quick Disconnects included
  • For use with Air, Oxygen, or Heliox
  • A unique microphone (Part #: 550-0010-01) can be linked to an Amcom ™ series communicator, allowing the person inside the chamber to clearly communicate with people outside the chamber
  • CE 607930
  • US Patent No. 8,336,547
  • Int. PCT. Pat. App. No. US2012/066144 pending

350M BIBS Mask – P/N: 350M-01 Includes:

  • (1) 10 Foot Hose Assembly – P/N: 540-0004-01
  • (1) Oxygen Cleaned Quick Disconnect Socket – Brass – P/N: 59853-00
  • (1) Oxygen Cleaned Quick Disconnect Socket – P/N: 18969-00
  • (1) 350M BIBS Mask User’s Manual – P/N: 350M-UM
  • (1) Certificate of Conformance

Warning: The Amron 350M BIBS Mask was designed and is for use within a hyperbaric chamber only. It is NOT intended for and must NOT be used underwater.

 

In Stock

CO2 Scrubber – 7Lt

750.00$

Features

  • Dependable motor, completely sealed with brushless design
  • Two versions available: adjustable pre-set fan speed or externally controllable fan speed
  • 24 VDC, 2A power supply (pre-set fan speed)
  • Externally controlled version requires an optional fan speed control unit
  • Canister can hold approximately 16.5 lbs (7.5 kg) of CO2 adsorbent
  • The canister is connected to the motor by a bayonet locking mechanism, so it can be easily replaced and/or refilled

Includes

  • User Manual

Specifications

  • Power Supply: 24-28 VDC, 2 amps
  • Rotating Speed (without canister, atmospheric pressure): 1400-4000 RPM
  • Operating Pressure: Max. 600 PSI/42 bar (420 MSW)
  • Dimensions: 9.7 in. H x 8.9 in. W x 16.6 in. D (24.5 cm x 22.6 cm x 42.2 cm)
  • Weight Complete Unit (empty canister): 18.3 lbs (8.3 kg)
  • Weight Complete unit (full canister): 35.3 lbs (16 kg)

 

In Stock

Dwyer 10-100 lpm Flowmeter

75.00$

Features

  • Exceptionally tough
  • 2 inch scale
  • Stainless steel valve and connections

Specifications

  • Scale: 2 in.
  • Scale Type: LPM Air
  • Range: 10-100
  • Options: Stainless Steel Metering Valve & Connections

Pipe Connections

  • VFA and VFB: 1/8 in. NPT (1/4 in. NPT on VFB 85 and 86)
  • O-rings: Buna-N
  • Pressure Rating: 100 PSI Max.

Temperature Rating

  • VFA and VFB: 150° Max.

Accuracy

  • Model VFA: 5% of full scale

Model VFA Dimensions

  • Dimensions: 4-3/16 in. H x 1 in. W x 1-1/4 in. D
  • BV or SSV (open): 2-1/16 in.

Call Us

Hyperbaric inside Fan Coil unit – 7kW

750.00$

Features

  • Feathered edge fan blade for super quiet operation
  • Stainless steel rotor ball bearings, giving long life operation
  • Wide voltage operation
  • Brushless electronic commutation provided by dependable solid state circuitry
  • Electronic locked rotor protection, current limited, with automatic restart capability
  • Per MIL STD 461 EMI standards per FCC part 15, Subpart J of Docket 20780, Class A and B radiated and conducted Emissions
  • Operating temperature range of -10 to 70 C
  • UL Yellow Card recognized (File No. E31293)

Specifications

  • Cooling & Heating Capacity: 4000 BTU/hr
  • Fluid Flow Rate Required: 3-6 GPM @ 5 PSIG
  • Fluid Media: 50% Ethylene or Propylene Glycol, 50% Water
  • Fluid Capacity: 1 Quart (approx)
  • Voltage: Nominal 24VDC, Min/Max: 12/28VDC
  • Speed: 3350 RPM, 230 CFM @ 25VDC
  • Current: 2 Amp (ambient), 5 Amp (peak)
  • Depth Rating: 250 FSW
  • Input/Output Fluid Connections: 1/2 in. male JIC, left or right side
  • Temperature Rating: 25° to 110°F (-4° to 43°C)

In Stock

Latex Neckseal Untrimmed

40.00$

Features:

  • Latex Neck Seals (Trimmed P/N: 8891-005 and Untrimmed P/N: 8891-005-00) are compatible with BOTH OLD Neck Ring (P/N: 8891-001) and 2014 improved Neck Ring (P/N: 8891-011)
  • Both versions of the Oxygen Treatment Hood P/N: 8891-010 fit BOTH OLD and 2014 improved Neck Rings
  • CE and FDA Registered
  • Integrated o-ring seal that allows for easy installation or removal
  • Numbered trim rings for accurate neck sizing

 

In Stock

Silencer – Hyperbaric use – 85 dB guarantee

120.00$

Features

  • World Class Atomuffler superbly quiets Exponentially Perceived Noise (EPNdB)
  • Constructed entirely of corrosion resistant material for long life and maintenance-free performance

 

In Stock

Thermo – Hygromete

220.00$

Features

  • Bi-metallic thermometer is accurate to 1% of scale
  • Range 0° to 210° F (-20° to 100° C), certified to be accurate within ±3%
  • Used inside the sat system (Living chamber and Diving Bell)

Specifications

  • Temperature Range: -20 to 100°C and 0 to 210°F
  • Relative Humidity Range: 0 to 100%
  • Case: Solid Brass, gleaming finish, drilled for wall mounting
  • Dial Size: 6 in. overall Dia. (15.2 cm)
  • Weight: 3 lbs (1.4 kg)

In Stock

Water based hyperbaric fire extinguisher

390.00$

Model 240 Hyperbaric Water Based Fire Extinguisher: Part Number Model-240 Includes

  • (1) Wall Hanger
  • Owner’s Manual

Specifications

  • Water Capacity: 2.0 gal. (7.6 liters)
  • Maximum Pressure: 165 psi (11.3 bar)
  • Maximum Depth: 225 FSW
  • Dimensions: 7.0 in. Dia. x 30 in. H (18 cm x 76 cm)
  • Empty Weight: 6.50 lbs. (2.95 kg)

İn Stock